This research developed and validated a cost-effective proof-of-concept system to measure tyre forces and moments. The C 8k setup was calibrated and verified against a wheel force transducer, demonstrating accurate measurements of the wheel axis. Road tests at the RDW test centre captured both linear …

In this research several methods were developed and validated using the Supermini 200 wavelength dispersive X-ray fluorescence spectrometer. A multielement was calibrated containing 26 elements and corrected for interference according to the de Jongh algorithm. The limits of detection and quantification …

A main challenge in single emitter microscopy is that it is difficult to efficiently collect all the emitted light from single photon sources. Due to the dipole nature of the single photon sources, is it hard to measure the brightness of these molecules in a calibrated manner, since the light is not …

Research was conducted to enable remote control of a humanoid robotic arm using movements of the human arm. Several options for the measurement technique have been discussed, resulting in a proposal for usage of MARG sensor modules to measure human arm movement. The InvenSense MPU9250 sensors where used, …

In the Province of Zeeland, ragworms (Alitta virens) are farmed on large scale in open rectangular (flow through systems) ponds. In April these ponds are stocked with ragworm larvae from a hatchery. The juveniles bury themselves in the sediment layer in the pond and are fed with feed pellets. Dependent …

In the medical community, X-rays are an important tool in imaging the human body. In principle X-ray images are 2 dimensional images. By measuring such X-ray images at multiple angles, one can construct the 3 dimensional inner structure of the sample. This 3 dimensional structure is created by applying …

In this report the properties of the E-field sheet have been measured. Also the connection between the E-field sheet and the pc has been developed. For visualisation of the data a GUI has been made in Matlab which also reads out the data from the DAQ card. Before a measurement on the clinical equipment …