This project helps to reach the end goal of doing long distance measurements. Long distance measurements depends on the refractive index of air. The refractive index depends on temperature, pressure, humidity and gas mixture. The biggest uncertainty of calculating the refractive index is the temperature, …

Locally produced methane, - either as biomethane or power-to-gas product, has to be stored to provide a reliable gas source for the fluctuating demand of any local gas distribution network. Additionally, methane is a prominent transportation fuel but its suitability for vehicular application depends …

Methane storage in adsorbed form is a promising way to effectively and safely store fuel for vehicular transportation or for any other potential application. In a solid adsorbent, nanometer wide pores can trap methane by van der Waals forces as high density fluid at low pressure and room temperature. …

Renewable energy is often suggested as a possible solution for reducing greenhouse gas emissions and decreasing dependency on fossil energy sources. The most readily available renewable energy sources in Europe, wind, solar and biomass are dispersed by nature, making them ideally suited for use within …

The working hypothesis for this research project is that it is possible to develop a new functional polymer printing process for the direct application of conductive polymer onto textiles. We will use the basic extrusion technology that is currently applied in 3D printing. Thus the aim is also expanding …

Energy management and carbon accounting schemes are increasingly being adopted as a corporate response to climate change. These schemes often demand the setting of ambitious targets for the reduction of corporate greenhouse gas emissions. There is however only limited empirical insight in the companies’ …

Swarm planning is a theory and practical approach to deal with uncertain futures. By anticipating scenarios such as a ‘post-carbon’ world and a ‘pre-adaptive’ landscape, it offers an alternative pathway to prepare for medium-term incremental and step changes. The focus is on the regional scale with a …

Through an increasing demand for lower carbon dioxide discharges together with the anticipation of declining fossil fuels reserves, energy production in Europe will consequently be more and more originated from structures that are winning energy from renewable sources. Europe’s aim is to generate 20% …

The focus of this paper is to make a comparison between five different types of conductive, heatable samples. These samples have been produced according to the five most important implementation techniques developed so far, which are knitting, weaving, embroidery, printing and nonwoven padding  –and …