Concrete is arguably the most widely used building material in the world today. Current estimates of world cement manufacture are of the order of 1.7*109 tons per year, enough to produce well over 6 km3 of concrete per year or at least 1 m3 per person (Gartner, 2004). It is a composite material made …

The aim of this research was to find out if Mycelium has the ability to replace stones in a roman arch bridge structure, by setting up the appropriate laboratory tests and by conducting a desk research to help identifying the best substrate out of the three substrates picked that will produce mycelium …

Bulk molding compound (BMC) thermoset (bio) composites are difficult to recycle because they cannot be melted for reprocessing. However, this group of materials is often used in high-end applications where strength and lightweight materials are required, such as boat hulls, aircraft parts, car parts, …

1.2 Problem statement As previously mentioned, a fully biobased pedestrian bridge was built in 2016 in Eindhoven University of Technology, over the river Dommel. This was a 14m bridge made from hemp and flex-fibre base. The project was developed by multiple parties including CoE BBE. The initiators of …

Within BAM Infra (Netherlands) there is a 3D concrete printing facility already. This is the Europe's first commercial and industrial production location for 3D printing of concrete elements for bridges. The idea now for BAM (International) is to also include composite materials in the design of temporary …

The goal of this research was to set up suitable laboratory tests and analysis methods for the strength and durability testing of bio-based textile reinforced concrete. This thesis was a preparatory research for the actual development of bio-based TRC applications, which was not undertaken due to unforeseen …

This research proposes new structural lay-outs for large wind turbine blades. The lay-outs were found by an optimisation method where the aerodynamics of wind turbine blades was combined with the structural model of the blade, formulated in a corotational framework. The aeroelastic blade loads were calculated …